Adding Master Nodes to Achieve HA: One of the Best Practices for Using KubeKey

As demonstrated in my last article, you can use KubeKey to easily scale in and out your cluster. As I only had one master node in the example, the cluster did not feature high availability. In this post, I will continue to demonstrate how to scale out your cluster while by adding master nodes this time to achieve high availability.

The steps are listed as follows:

Download KubeKey.
Use KubeKey to retrieve cluster information with a configuration file created automatically.
Add your node and load balancer information in the file and apply the configuration.

Prepare Hosts

Here is my node information of the existing Kubernetes cluster.

Host IP	Host Name	Role	System
172.16.0.2	master1	master, etcd	CentOS 7.5, 8 Cores, 8 G Memory, 50 G Disk
172.16.0.3	worker1	worker	CentOS 7.5, 8 Cores, 8 G Memory, 50 G Disk
172.16.0.4	worker2	worker	CentOS 7.5, 8 Cores, 8 G Memory, 50 G Disk


$ kubectl get nodes
NAME      STATUS   ROLES    AGE     VERSION
master1   Ready    master   2m15s   v1.17.9
worker1   Ready    worker   86s     v1.17.9
worker2   Ready    worker   86s     v1.17.9

Here are the nodes that will be added to the cluster to achieve high availability. Note that the number of your etcd nodes in total must be odd.

Host IP	Host Name	Role	System
172.16.0.5	master2	master, etcd	CentOS 7.5, 8 Cores, 8 G Memory, 50 G Disk
172.16.0.6	master3	master, etcd	CentOS 7.5, 8 Cores, 8 G Memory, 50 G Disk
172.16.0.7	worker3	worker	CentOS 7.5, 8 Cores, 8 G Memory, 50 G Disk

node-info

For more information about requirements for nodes, network, and dependencies, see this article.

Prepare Load Balancers

You can use any cloud load balancers or hardware load balancers (e.g. F5). In addition, Keepalived and HAproxy, or Nginx is also an alternative for creating high-availability clusters. In this example, I have an internal load balancer with a listener that listens on port 6443 (api-server) and an external load balancer with a listener that listens on the port of the Kubernetes dashboard.

Download KubeKey

Download KubeKey from its GitHub Release Page or use the following command to download KubeKey version 1.0.1. You only need to download KubeKey to one of your machines that serves as the taskbox for scaling.
```
curl -sfL https://get-kk.kubesphere.io | VERSION=v2.0.0 sh -
```
The above command downloads KubeKey and unzips the file. Your folder now contains a file called kk. Make it executable:
```
chmod +x kk
```

Add Master Nodes

Create a configuration file using KubeKey. If your cluster is installed through KubeKey, you may still have that configuration file on your machine. In this case, you can edit it directly. Otherwise, execute the following command to retrieve your cluster information.
```
./kk create config --from-cluster
```

The above command creates a configuration file, which is sample.yaml by default. Open the file and you can see some fields are pre-populated with values. Add the information of new nodes and your load balancer to the file.


vi sample.yaml

This is my configuration for your reference:


apiVersion: kubekey.kubesphere.io/v1alpha1
kind: Cluster
metadata:
  name: sample
spec:
  hosts:
  # You should complete the ssh information of the hosts
  - {name: master1, address: 172.16.0.2, internalAddress: 172.16.0.2, user: root, password: Testing123}
  - {name: master2, address: 172.16.0.5, internalAddress: 172.16.0.5, user: root, password: Testing123}
  - {name: master3, address: 172.16.0.6, internalAddress: 172.16.0.6, user: root, password: Testing123}
  - {name: worker1, address: 172.16.0.3, internalAddress: 172.16.0.3, user: root, password: Testing123}
  - {name: worker2, address: 172.16.0.4, internalAddress: 172.16.0.4, user: root, password: Testing123}
  - {name: worker3, address: 172.16.0.7, internalAddress: 172.16.0.7, user: root, password: Testing123}
  roleGroups:
    etcd:
    - master1
    - master2
    - master3
    master:
    - master1
    - master2
    - master3
    worker:
    - worker1
    - worker2
    - worker3
  controlPlaneEndpoint:
    # If loadbalancer is used, 'address' should be set to loadbalancer's ip.
    domain: lb.kubesphere.local
    address: 172.16.0.253
    port: 6443
  kubernetes:
    version: v1.17.9
    imageRepo: kubesphere
    clusterName: cluster.local
    proxyMode: ipvs
    masqueradeAll: false
    maxPods: 110
    nodeCidrMaskSize: 24
  network:
    plugin: calico
    kubePodsCIDR: 10.233.64.0/18
    kubeServiceCIDR: 10.233.0.0/18
  registry:
    privateRegistry: ""

Note

You are not allowed to modify the host name of existing nodes (e.g. master1) when adding new nodes.
For more information about different parameters in the configuration file, see this article.

Pay attention to the controlPlaneEndpoint field in the above example.
```
  controlPlaneEndpoint:
    # If loadbalancer is used, 'address' should be set to loadbalancer's ip.
    domain: lb.kubesphere.local
    address: 172.16.0.253
    port: 6443
```
- The domain name of the load balancer is lb.kubesphere.local by default for internal access. You can change it based on your needs.
- In most cases, you need to provide the private IP address of the load balancer for the field address. However, different cloud providers may have different configurations for load balancers. For example, if you configure a Server Load Balancer (SLB) on Alibaba Cloud, the platform assigns a public IP address to the SLB, which means you need to specify the public IP address for the field address.
- The field port indicates the port of api-server.
Save the file and execute the following command to apply the configuration:
```
./kk add nodes -f sample.yaml
```
You can see the output as below when scaling finishes.
```
Congratulations! Scaling cluster is successful.
```

Execute the following command to check the status of namespaces.


kubectl get pod --all-namespaces


NAMESPACE     NAME                                       READY   STATUS    RESTARTS   AGE
kube-system   calico-kube-controllers-59d85c5c84-tnk8s   1/1     Running   0          36m
kube-system   calico-node-87gtw                          1/1     Running   0          75s
kube-system   calico-node-8dj8n                          1/1     Running   0          76s
kube-system   calico-node-k2bjr                          1/1     Running   0          35m
kube-system   calico-node-lpl78                          1/1     Running   0          36m
kube-system   calico-node-scfld                          1/1     Running   0          75s
kube-system   calico-node-t27vn                          1/1     Running   0          35m
kube-system   coredns-74d59cc5c6-87qkr                   1/1     Running   0          36m
kube-system   coredns-74d59cc5c6-qm7kb                   1/1     Running   0          36m
kube-system   kube-apiserver-master1                     1/1     Running   0          36m
kube-system   kube-apiserver-master2                     1/1     Running   0          73s
kube-system   kube-apiserver-master3                     1/1     Running   0          74s
kube-system   kube-controller-manager-master1            1/1     Running   0          36m
kube-system   kube-controller-manager-master2            1/1     Running   0          74s
kube-system   kube-controller-manager-master3            1/1     Running   0          74s
kube-system   kube-proxy-48h9q                           1/1     Running   0          35m
kube-system   kube-proxy-72cv7                           1/1     Running   0          76s
kube-system   kube-proxy-gjzk2                           1/1     Running   0          36m
kube-system   kube-proxy-nkkv8                           1/1     Running   0          75s
kube-system   kube-proxy-swh67                           1/1     Running   0          35m
kube-system   kube-proxy-xn7g9                           1/1     Running   0          75s
kube-system   kube-scheduler-master1                     1/1     Running   0          36m
kube-system   kube-scheduler-master2                     1/1     Running   0          73s
kube-system   kube-scheduler-master3                     1/1     Running   0          74s
kube-system   nodelocaldns-47bgw                         1/1     Running   0          35m
kube-system   nodelocaldns-4bp5b                         1/1     Running   0          75s
kube-system   nodelocaldns-5f9g8                         1/1     Running   0          36m
kube-system   nodelocaldns-h4xzk                         1/1     Running   0          35m
kube-system   nodelocaldns-jz86j                         1/1     Running   0          75s
kube-system   nodelocaldns-xcjt6                         1/1     Running   0          76s

Execute the following command to check your nodes.


kubectl get nodes


NAME      STATUS   ROLES    AGE     VERSION
master1   Ready    master   37m     v1.17.9
master2   Ready    master   2m17s   v1.17.9
master3   Ready    master   2m17s   v1.17.9
worker1   Ready    worker   36m     v1.17.9
worker2   Ready    worker   36m     v1.17.9
worker3   Ready    worker   2m18s   v1.17.9

As you can see above, all the nodes are up and running.

Summary

The steps of adding more master nodes so that your cluster is highly available is basically the same as demonstrated in my last post. The major difference is that you must configure your load balancer correctly.

Reference

KubeKey

Multi-node Installation

KubeKey: A Lightweight Installer for Kubernetes and Cloud Native Addons

Scaling a Kubernetes Cluster: One of the Best Practices for Using KubeKey